New Simco Aerostat XP-20F Explosion Proof Ionizing Blower 285 SCFM
Unused spare from NASA, a Simco Aerostat XP-20F Explosion Proof Ionizing Blower. Industrial Static ControlXP-20F IONIZING BLOWER Simco-Ions XP-20F Ionizing Blowers are highly efficient, extended range static eliminators designed to neutralize static charges on materials in hazardous locations. The XP-20F unit works with Simco-Ion XP and XPM power supplies to eliminate the problems caused by static in rugged industrial environments. UL listed for Class I, Division 1 & 2, Group D hazardous areas Rugged design as an intrinsically safe unit Easy to replace disposable air filters Input 110-119V AC, 57-63 Hz, 1.3A Weight 24 lbs, 8 oz Size 17.75W x 9H x 16.75D Air Volume 285 scfm (fixed) Airflow Distance from Ionizer FPM 1 1000 2 500 4 200 (measured at centerline of airstream) Temperature 32-104F Enclosure Steel housing, phenolic inner bars and supports, stainless steel emitter pins Filter Replaceable Foam Filter Specifications: Ionization Characteristics Time vs. Distance for Effective Neutralization The XP-20F Ionizing air blower is designed specifically for use in Class I, Division 1, Group D, hazardous areas where the neutralization of static charges is critical for both personnel and environmental safety. The XP-20F unit can be powered by Simco-Ions non-incendiary power supply mounted within the hazardous area or an appropriate Simco-Ion power supply mounted, outside the hazardous area, according to local code restriction. The XP-20F Ionizing Blower should not be mounted with the motor shaft vertically upward. Chart indicates approximate times required for XP-20F to discharge a plastic sheet charged to 10 kV. Notes: 1. For 6 x 6, 17 PF isolated metal plate charged to +5 kV. 2. Decay times listed above are averages of + and – charges. Distance from Blower Decay Time: 1 0.9 sec 2 2.4 sec 3 4.8 sec 4 7.5 sec 5 9.2 sec
